Protek
Filters
- 2S (0)
- 4S (0)
- Air filter (0)
- Antenna (0)
- Bag (0)
- Balance Adapter (0)
- Ball (0)
- Ball Bearings (2)
- Ball Studs (3)
- Battery Connectors (0)
- bearings (3)
- Bearings (1)
- Black (0)
- Blade (0)
- Blue (0)
- Brushless (0)
- brushless servo (0)
- Carrier Bag (0)
- Ceramic Diff Balls (0)
- Charge Lead (0)
- Charge Leads (0)
- Charger (0)
- Charging (0)
- Chassis Protector (0)
- Connectors (0)
- Diff Balls (0)
- Differential Balls (0)
- Digital Servo (0)
- Driver (0)
- End (0)
- Fan (0)
- Female (0)
- Flat (0)
- Gear (0)
- Gears (0)
- Glow Plug (0)
- Glue Bands (0)
- Hardware (25)
- Heavy Duty (0)
- Hex (0)
- Hex Driver (0)
- High Voltage (0)
- LIHV (0)
- LiPo (0)
- LiPo Battery (0)
- Male (0)
- Metal Servo Gear Set (0)
- Metric (0)
- Mod (0)
- Mod 1 (0)
- Nitro (0)
- Nitro Buggy (0)
- Nut (0)
- Nut Driver (0)
- Philips (0)
- Pinion (0)
- Pinion Gear (0)
- Power (0)
- Protective Sheet (0)
- Protek (33)
- ProTek (0)
- ProTek RC (28)
- ProtekRC (0)
- Reciever Pack (0)
- Replacement (0)
- Scissors (0)
- Screwdriver (0)
- Sealed ball bearings (1)
- Sealed Bearings (1)
- Sensor Cable (0)
- Sensor Wire (0)
- Servo (0)
- Servo Horn (0)
- Servo Horns (0)
- Servo Screws (2)
- Servo Tape (0)
- Servos (0)
- Set (0)
- Set of Alu Shims (0)
- Set Screws (1)
- Shim (4)
- Shims (5)
- Standard (0)
- Steel Gear (0)
- Storage Container (0)
- Tip (0)
- Titanium (2)
- Tool (0)
- tool (0)
- Tools (0)
- Transmitter Battery (0)
- Transmitter Case (0)
- Trutorque (0)
- Turbo Plug (0)
- turnbuckle (0)
- Washer set (3)
- Washers (3)
- wrench (0)
- Wrench (0)
- XT60 (0)
PTK-H-5901 ProTek RC 4x9x0.5mm Lower Arm Washer (10)
ProTekThis is a pack of ten ProTek R/C 4x9x0.5mm Lower Arm Washers. These washers have a 4mm inner diameter, with a 9mm outer diameter and are 0.5mm thic...
View full detailsPTK-H-5903 ProTek RC 13x16mm Drive Cup Washer (10) (0.1mm)
ProTekThis is a pack of ten ProTek R/C 13x16x0.1mm Drive Cup Washers. These washers have a 13mm inner diameter, with a 16mm outer diameter and are 0.1mm ...
View full detailsPTK-H-5904 ProTek RC 13x16mm Drive Cup Washer (10) (0.2mm)
ProTekThis is a pack of ten ProTek R/C 13x16x0.1mm Drive Cup Washers. These washers have a 13mm inner diameter, with a 16mm outer diameter and are 0.1mm ...
View full detailsPTK-H-5906 ProTek RC 5x7mm Clutch Bell Shim (10) (0.2mm)
ProTekThis is a pack of ten ProTek R/C 5x7x0.1mm Clutch Bell Shims. These washers have a 5mm inner diameter, with a 7mm outer diameter and are 0.1mm thic...
View full detailsPTK-H-5907 ProTek RC 3x7x1mm Servo Washer (10)
ProTekThis is a pack of ten ProTek R/C 3x7x1mm Servo Washers. These washers have a 3mm inner diameter, with a 7mm outer diameter and are 1mm thick. These...
View full detailsPTK-H-5908 ProTek RC 3x6x1mm Engine Mount Washer (10)
ProTekThis is a pack of ten ProTek R/C 3x6x1mm Engine Mount Washers. These washers have a 3mm inner diameter, with a 6mm outer diameter and are 1mm thick...
View full detailsPTK-H-5909 ProTek RC 8x12x0.1mm Pinion Gear Washer (10)
ProTekThis is a pack of ten ProTek R/C 8x12x0.1mm Pinion Gear Washers. These washers have a 8mm inner diameter, with a 12mm outer diameter and are 0.1mm ...
View full detailsPTK-H-5913 ProTek RC 6x11.5x0.2mm Differential Gear Washer (10)
ProTekThis is a pack of ten ProTek R/C 6x11.5x0.2mm Differential Gear Washers. These washers have a 6mm inner diameter, with a 11mm outer diameter and ar...
View full detailsPTK-H-5914 ProTek RC 3.6x12x0.2mm Differential Gear Washer (10)
ProTekThis is a pack of ten ProTek R/C 3.6x12x0.2mm Differential Gear Washers. These washers have a 3.6mm inner diameter, with a 12mm outer diameter and ...
View full detailsPTK-H-6200 ProTek RC 4-40 x 1/4" "High Strength" Socket Head Screws (10)
ProTekProTek RC 4-40 x 1/4" "High Strength" Socket Head Cap Screws (10)
PTK-H-7100 ProTek RC 4-40 x 1/4" "High Strength" Flat Head Screws (10)
ProTekProTek RC 4-40 x 1/4" "High Strength" Flat Head Screws (10)
PTK-H-8103 ProTek RC 4-40 x 5/16" "High Strength" Button Head Screws (10)
ProTekProTek RC 4-40 x 5/16" "High Strength" Button Head Screws (10)
PTK-T-5091 ProTek RC 3x18mm "Grade 5" Titanium Button Head Hex Screw (4)
ProTekProTek R/C 3x18mm "Grade 5" Titanium Button Head Hex Screws are CNC machined and thread rolled to near-exact tolerances from high-quality 6AL-4V (G...
View full detailsPTK-T-5098 ProTek RC 3x6mm "Grade 5" Titanium Button Head Hex Screw (4)
ProTekProTek R/C 3x6mm "Grade 5" Titanium Button Head Hex Screws are CNC machined and thread rolled to near-exact tolerances from high-quality 6AL-4V (Gr...
View full details