Protek RC
Filters
- 2S (8)
- 4S (2)
- Air filter (5)
- Antenna (4)
- Balance Adapter (2)
- Ball (3)
- Ball Bearings (2)
- Ball Studs (3)
- Battery Connectors (0)
- bearings (3)
- Bearings (2)
- Black (3)
- Blade (2)
- Blue (2)
- Brushless (3)
- brushless servo (3)
- Carrier Bag (3)
- Ceramic Diff Balls (2)
- Charge Lead (2)
- Charge Leads (3)
- Charger (1)
- Charging (6)
- Chassis Protector (6)
- Connectors (9)
- Diff Balls (3)
- Differential Balls (3)
- Digital Servo (2)
- Driver (21)
- Fan (1)
- Female (4)
- Flat (2)
- Gear (6)
- Gears (0)
- Glow Plug (2)
- Glue Bands (1)
- Hardware (30)
- Heavy Duty (1)
- Hex (16)
- Hex Driver (3)
- Hex drivers (2)
- High Voltage (3)
- LIHV (2)
- LiPo (9)
- LiPo Battery (7)
- Male (5)
- Metal Servo Gear Set (3)
- Metric (15)
- Mod (0)
- Mod 1 (5)
- Nitro (13)
- Nitro Buggy (3)
- Nut (5)
- Nut Driver (3)
- Pinion (25)
- Pinion Gear (23)
- Pit Light (2)
- Power (5)
- Protective Sheet (2)
- Protek (275)
- ProTek (10)
- ProTek RC (86)
- ProtekRC (13)
- Reciever Pack (2)
- Replacement (3)
- Scissors (2)
- Screwdriver (6)
- Sealed ball bearings (2)
- Sealed Bearings (2)
- Sensor Cable (4)
- Sensor Wire (2)
- Servo (10)
- Servo Horn (5)
- Servo Horns (3)
- Servo Screws (2)
- Servo Tape (2)
- Servos (5)
- Set (4)
- Set of Alu Shims (3)
- Set Screws (6)
- Shim (4)
- Shims (5)
- Standard (12)
- Standard Hex Driver (2)
- Steel Gear (2)
- Storage Container (2)
- Tip (5)
- Titanium (2)
- Tool (8)
- tool (6)
- Tools (33)
- Transmitter Battery (2)
- Transmitter Case (0)
- Trutorque (26)
- TruTorque (2)
- Turbo Plug (3)
- turnbuckle (3)
- Washer set (3)
- Washers (3)
- wrench (4)
- XT60 (5)
PTK-H-5913 ProTek RC 6x11.5x0.2mm Differential Gear Washer (10)
ProTekThis is a pack of ten ProTek R/C 6x11.5x0.2mm Differential Gear Washers. These washers have a 6mm inner diameter, with a 11mm outer diameter and ar...
View full detailsPTK-7615 ProTek RC Associated B74 Series Aluminum Clamping Servo Horn (Black) (25T-Futaba/Savox/ProTek)
ProTekThe ProTek R/C Associated B74 series Aluminum Clamping Servo Horn. This horn is machined from a solid block of aluminum alloy and anodized black. T...
View full detailsProTek RC 2S High Current Charge/Balance Adapter (5mm Bullet to Female XT90) (10awg) (24") (9pin XH balance plug)
ProTekThe ProTek R/C 2S High Current Charge/Balance Adapter has been designed for the Junsi iCharger 458DUO and is great if you charge/discharge your 5mm...
View full detailsProTek RC 2090 Tuned Exhaust Pipe w/75mm Manifold (Welded Nipple)
ProTekThis is the ProTek R/C 2090, EFRA 2089 Tuned Pipe, with an included 2090 75mm Manifold. This package also includes two long manifold springs, three...
View full detailsProTek RC Samurai RM.1 Maifield Edition 3-Port .21 Competition Nitro Engine w/21j Carburetor (Turbo Plug, Ceramic Bearing)
ProTekTop Level 1/8 Off-Road Racing Engine ProTek R/C is Delighted to announce the arrival of the astounding Samurai RM.1 Maifield Edition 3-Port .21 Com...
View full detailsPTK-5048 ProTek RC Tamiya Connector Set (1 Male/1 Female)
ProTekThis is a pack of Tamiya type connectors from Protek R/C. This pack includes one male plug, one female plug and the necessary metal connectors.
PTK-10046 ProTek RC 10x15x4mm Rubber Sealed "Speed" Bearing (10)
ProTekThis is a pack of ten 10x15x4mm rubber sealed "Speed" wheel bearings. ProTek R/C "Speed" bearings are high quality steel/chrome bearings designed f...
View full detailsPTK-2107 ProTek RC Braided Brushless Motor Sensor Cable (90mm)
ProTekPTK-2107 ProTek RC Braided Brushless Motor Sensor Cable (90mm) This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is inte...
View full detailsPTK-211 - ProTek RC "iChecker 3.0" LCD LiPo Battery Cell Checker (2-8S) w/Balance Discharging
ProTekPTK-211 - ProTek RC "iChecker 3.0" LCD LiPo Battery Cell Checker (2-8S) w/Balance Discharging This is the ProTek R/C "iChecker 3.0" LCD Battery Che...
View full detailsPTK-8486 ProTek RC Sprue Side Cutter
ProTekPTK-8486 ProTek RC Sprue Side Cutter The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin...
View full detailsPTK-5332 Protek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH)
ProTekPTK-5332 Protek RC 1S 12-Battery Parallel Charger Board (Ultra Micro/JST-PH) This is the ProTek R/C 1S 12-Battery Parallel Charger Board. Do you ha...
View full detailsProTek RC Aluminum 1/8 Pinion Gear Caddy
ProTekProTek RC Aluminum 1/8 Pinion Gear Caddy
PTK-10055 Protek RC 5x12x4mm Metal Shielded "Speed" Bearings (10)
ProTekPTK-10055 Protek RC 5x12x4mm Metal Shielded "Speed" Bearings (10)
PTK-8600 Protek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (13T)
ProTekPTK-8600 Protek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (13T)
PTK-8602 ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (14T)
ProTekPTK-8602 ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (14T) This is a Protek 48P Light Weight Aluminum Pinion Gear. T...
View full detailsPTK-1KTBL ProTek RC 1KTBL Black Label Ultra High Torque Brushless Waterproof Crawler Servo (High Voltage/Metal Case) (Digital)
ProTekPTK-1KTBL ProTek RC 1KTBL Black Label Ultra High Torque Brushless Waterproof Crawler Servo (High Voltage/Metal Case) (Digital) The ProTek 1KTBL w...
View full detailsPTK-5043 Protek RC Sheathed T-Style Plug (2 female)
ProTekPTK-5043 Protek RC Sheathed T-Style Plug (2 female)
PTK-7601 ProTek RC Nitro Starter Set w/Glow Ignitor, Fuel Bottle, Wrenches & Screwdrivers
ProTekThis is the ProTek R/C Nitro Starter Set. This package includes many of the critical accessories that are required to get your nitro vehicle runnin...
View full detailsPTK-H-4002 - ProTek RC 3x5mm "High Strength" Cup Style Set Screws (10)
ProTekPTK-H-4002 - ProTek RC 3x5mm "High Strength" Cup Style Set Screws (10) ProTek RC 3x5mm "High Strength" Cup Style Set Screws (10)
PTK-H-4102 - ProTek RC 4x6mm "High Strength" Cup Style Set Screws (10)
ProTekPTK-H-4102 - ProTek RC 4x6mm "High Strength" Cup Style Set Screws (10) This is a pack of ten ProTek RC 4x6mm "High Strength" Cup Style Set Screws.
PTK-H-4105 - ProTek RC 4x12mm "High Strength" Cup Style Set Screws (10)
ProTekProTek RC 4x12mm "High Strength" Cup Style Set Screws (10) This is a pack of ten ProTek RC 4x12mm "High Strength" Cup Style Set Screws.
PTK-H-9005 - ProTek RC 4-40 x 1/2" "High Strength" Cup Style Set Screws (10)
ProTekProTek RC 4-40 x 1/2" "High Strength" Cup Style Set Screws (10)
PTK-8239 - ProTek RC "TruTorque" HSS Steel Standard Hex Replacement Tip (0.05")
ProTekProTek RC "TruTorque" HSS Steel Standard Hex Replacement Tip (0.05")
PTK-2003 - ProTek RC 3.0mm Ceramic Differential Balls (12)
ProTekPTK-2003 - ProTek RC 3.0mm Ceramic Differential Balls (12)