95076-4 Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, RTR, with TQi 2.4GHz radio system, VXL-6s power system,
by Traxxas
Sold out
Original price
$699.95
-
Original price
$699.95
Original price
$699.95
$699.95
-
$699.95
Current price
$699.95
Availability:
Out of stock
Availability:
Out of stock
Availability:
Out of stock
Availability:
Out of stock
$699.95
95076-4 Sledge 1/8 scale 4WD brushless monster truck. Fully assembled, RTR, with TQi 2.4GHz radio system, VXL-6s power system
**PLEASE NOTE**: Some models will come with an open box if they were being used as our display model in our hobby shop, these models are still new and unused but were opened for display purposes.
- VXL-6s™ Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon® 2000kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Aluminum motor cradle mount
- Supports entire motor length
- Reduces flex for longer gear life
- Up to 70+ mph with Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management®
- Helps prevents spinouts and loss of control
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi™ 2.4GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4GHz 5-channel micro receiver (#6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled models—just switch on and drive, “model selection” is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Drivetrain
- Full-time 4-wheel drive
- Heavy-duty steel driveshafts
- Large 8 mm steel stub axles
- Steel dogbone center driveline
- Protective rubber boots on differential inputs
- Transmission
- Mod-1 pinion and spur gears
- Fixed gear mesh system
- Torque-Biasing Center Drive
- Differentials
- Heavy-duty sealed 4-gear design
- Large scale steel ring and pinion gears
- Large 8 mm output shafts
- Steel drive cups
- Easy access bulkheads
- GT-Maxx®Shocks
- Longer rear shocks for more travel
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Height-adjustable spring retainer
- Lower spring perches bolted on
- Suspension
- Thick 5 mm 6061-T6 aluminum shock towers
- Performance-optimized geometry
- Ultra-tough composite arms
- Made from our strongest cold-weather material
- Molded insert for clean look
- Rear rock deflectors
- Press-in hinge pins to reduce play
- Oversize molded toe and camber links
- Heavy-duty C-hubs with oversize bearings
- Stronger than conventional designs
- Require no adjusments
- Multiple mounting points for suspension tuning
- Chassis
- 3.2 mm ribbed aluminum chassis
- Formed edges for improved strength
- Thick aluminum T-Bar™ for added rigidity
- Stronger than round bars
- High-strength buttressing on shock towers
- Rugged locking battery compartment with quick-release door
- Low-CG design for improved handling
- Interlocking components for tight tolerances
- Tough front and rear bumpers double as skid plates
- Hidden wire management for clean appearance
- 3.2 mm ribbed aluminum chassis
- Clipless ProGraphix® Body
- One-handed clipless body mounting system
- Rigid internal frame
- Molded body reinforcements for tear-through protection
- Protective roof skids
- Rugged high-downforce rear wing
- Steering
- Powerful 2275 metal gear servo
- 347 oz-in torque
- Fully waterproof
- High-throw bellcrank steering design
- Heavy-duty servo saver with aluminum posts
- Metal servo horn
- Powerful 2275 metal gear servo
- Wheels and Tires
- TSM-rated construction resists ballooning
- Huge 6.7” Sledgehammer all-terrain tires
- Tough 3.8” black wheels
- Splined 17 mm aluminum axle hubs