{"product_id":"ur3401-mr2x-ultimate-racing-mxr-v2-nitro-racing-engine-ceramic-with-airmax-filter-team-edition","title":"UR3401-MR2X Ultimate Racing MXR v2 Nitro Racing Engine (Ceramic) with AirMax Filter (Team Edition)","description":"\u003cdiv class=\"container\"\u003e\n\u003cdiv itemscope=\"\" itemtype=\"http:\/\/schema.org\/Product\"\u003e\n\u003cdiv class=\"themevale_productDescription\"\u003e\n\u003cdiv class=\"productView-description\"\u003e\n\u003cdiv class=\"tabs-contents\"\u003e\n\u003cdiv class=\"tab-content is-active\" id=\"tab-description\"\u003e\n\u003cdiv class=\"toggle-content is-open\" id=\"tabDescription-content\" aria-hidden=\"false\"\u003e\n\u003ch2\u003eThis is the MXR v2 \"Team Edition\" engine with Airmax Filter from Ultimate Racing. The \"Team Edition\" concept uses the same Ultimate engines that are for sale, but the engines are assembled directly in our factory, completely broken-in and then thoroughly checked by our competition team to extract 100% of the performance of Ultimate engines.\u003c\/h2\u003e\n\u003ch2\u003eThere are many manufacturers that offer pre-break-in services performed on benches with propellers. The problem is that this method only works as a pre-break-in. It is still necessary to continue breaking in the engine on the track.\u003c\/h2\u003e\n\u003ch2\u003eAt Ultimate Racing we wanted to go a step further and offer our customers the possibility of purchasing fully broken-in and ready-to-race engines without the need for any additional break-in on track, i.e. engines that can be used in the most demanding competitions as you receive them, directly from the box.\u003c\/h2\u003e\n\u003ch2\u003eTo ensure quality and that all \"Team Edition\" engines are broken-in exactly the same, we have evolved a fully monitored break-in bench where temperature, RPM and break-in time are controlled at all times. The whole break-in process is performed with the engine perfectly lubricated to minimize the loads and wear of all the parts, significantly increasing its useful life.\u003c\/h2\u003e\n\u003ch2\u003eDuring each of the break-in stages the engine's resistance torque is also controlled. Using this parameter, we know when the engine break-in is finished, ensuring that all of our \"Team Edition\" engines are perfectly broken-in and ready to compete.\u003c\/h2\u003e\n\u003ch2\u003eOnce the break-in process has completed, the engines are dismantled, checked piece by piece and assembled again by our competition team, thus ensuring the highest quality of product reaches our customers.\u003c\/h2\u003e\n\u003ch2\u003eThis engine is manufactured by the prestigious Japanese brand O.S. Engines, with the following characteristics:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOOLING HEAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MXR v2 is equipped with the same cooling head as its predecessors (MXS, MTS, MXR). This 8-fin cooling head has a very low center of gravity and has been designed to focus most of the airflow directly to the glow plug. By cooling the glow plug we get a more stable carburetion and idle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCARBURETOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce again, the MXR v2 comes with the 21 J3 carburetor. Unlike the original OS carburetor, its high-speed needle holder was redesigned for a better refrigeration of the fuel flow into the carburetor, lowering the temp of the carb, and consequently it is more stable with a great idle stability, improves fuel mileage and overall engine performance.\u003c\/p\u003e\n\u003cp\u003eThe carb comes with the Dust Cover Ring from Ultimate Racing. This ring has been designed to guarantee the best sealing of the carburetor.\u003c\/p\u003e\n\u003cp\u003eBesides this, the uniball joint of the carb slide was also modified with two stoppers instead of one. With this new modified design, you can easier adjust the angle of the uniball joint without having to disassemble the engine.\u003c\/p\u003e\n\u003cp\u003eThis carb offers a higher accuracy tuning, a very interesting advantage to experienced drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBACKPLATE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSame as in the MXR, the v2 backplate has been modified. The backplate is CNC machined and made of 7075-T6 Swiss Aluminum. It has been milled to improve the gas flow going to the piston and improving engine efficiency and performance.\u003c\/p\u003e\n\u003cp\u003eThanks to its design, you can remove the backplate without damaging the conrod even when it is on its lower position (PMI). The lateral grooves allow to easily remove the backplate without having to use any tool that can damage it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCRANKSHAFT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe crankshaft features DLC treatment and 2 tungsten weights to increase rotational inertia and improve mid-rev feel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBEARINGS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt comes with the original OS ceramic bearing in the rear and Ultimate Racing steel double sealed in the front.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVENTURI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe MXR v2 comes with two venturies, the 6 and 6.5mm Ultimate Racing FLOWMAX venturi. With an innovative design, longer than the standard O.S. venturis and wider at the base, unlike all others, makes the inferior part of the venturi and the carburetor have exactly the same diameter. This new geometry improves fluid dynamics, providing extra power that allows the use of smaller venturis without decreasing power, and as a consequence improves fuel mileage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSLEEVE AND PISTON\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStarting from the great base of the MXS, the sleeve has been modified, modifying the ports to be able to vary the inlet and exhaust timing to achieve more power without compromising fuel consumption.\u003c\/p\u003e\n\u003cp\u003eThe sleeve with 3 inlet port and an exhaust port guarantees a low fuel consumption with a very high but smooth and linear power.\u003c\/p\u003e\n\u003cp\u003eBoth, the sleeve and piston are made from a high strength aluminum bar to improve its durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCRANKCASE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis engine includes a new crankcase to improve the internal flow of fuel with the aim of improving performance by achieving extra power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAIRMAX AIR FILTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe AIRMAX concept is to achieve maximum airflow to the carburetor, while respecting the external dimensions of the filter to try to fit most of the 1\/8 offroad cars and bodies. This is achieved by means of a short, large-diameter tapered rubber connector tube that accelerates airflow and an internal filter structure with a larger surface area, without compromising engine protection. The result is a noticeable increase in engine power and performance.\u003c\/p\u003e\n\u003cp\u003eThe rubber connector tube is highly resistant to prevent unwanted damage.\u003c\/p\u003e\n\u003cp\u003eThe filter is supplied with a pre-oiled single layer foams, and includes a filter cover with pre-marked holes that can be used on rainy days.\u003c\/p\u003e\n\u003cp\u003eIncludes 2 adjustable plastic brakets to fit different cars. One is to fix it higher or lower. The other is to fix it closer or further horizontally. Both brackets have adjustable holes to give some leeway for easy adjustment.\u003c\/p\u003e\n\u003cp\u003eIncludes 4 screws and 2 plastic ties for complete mounting of the filter and brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDisplacement: 3,49 cc\u003c\/p\u003e\n\u003cp\u003ePower Output: 2.65 PS\/2.61 hp @ 34,000 rpm\u003c\/p\u003e\n\u003cp\u003ePractical Range RPM: 4,000 - 42,000 rpm\u003c\/p\u003e\n\u003cp\u003eBore x Stroke: 16,40x16,40mm\u003c\/p\u003e\n\u003cp\u003eSleeve: 3 + 1 ports\u003c\/p\u003e\n\u003cp\u003eRear Ball Bearing: ceramic\u003c\/p\u003e\n\u003cp\u003eFront Ball Bearing: steel\u003c\/p\u003e\n\u003cp\u003eCrankshaft: 14 mm\u003c\/p\u003e\n\u003cp\u003eCarburetor: 21 J3\u003c\/p\u003e\n\u003cp\u003eGlow plug: P3 Turbo\u003c\/p\u003e\n\u003cp\u003eExhaust Position: rear\u003c\/p\u003e\n\u003cp\u003eFuel type: Recommended Nitrolux Energy3 16%-25%.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Ultimate Racing","offers":[{"title":"Default Title","offer_id":52803658449185,"sku":"UR3401-MR2X","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0681\/5766\/9665\/files\/UR3401-MR2X__48146.jpg?v=1780681782","url":"https:\/\/997rcraceway.com\/products\/ur3401-mr2x-ultimate-racing-mxr-v2-nitro-racing-engine-ceramic-with-airmax-filter-team-edition","provider":"997 RC Raceway","version":"1.0","type":"link"}